Patio Covers in Folsom, CA: Aluminum, Lattice, Combination and Louvered Covers

West Coast Awnings designs, fabricates and installs custom aluminum patio covers for Folsom homeowners. We have been building covers for Sacramento Valley homes since 1985, we are installers rather than a kit retailer, and every cover is measured on site, engineered for your roofline and permitted before we build it.

No two patios take the same approach. The right cover depends on the existing roofline, how the patio sits relative to the afternoon sun, the span the structure has to clear, and how it can be attached or footed. Those are site conditions rather than catalogue choices, which is why we quote off an on-site measure instead of a price list.

Aluminum Patio Cover Styles We Build in Folsom

Four cover styles cover almost every Folsom patio. All are custom fabricated from woodgrain embossed aluminum, built to the exact dimensions of your patio, available in nine Duralum colors and four cut styles, and backed by a lifetime warranty.

Combination Lattice-Solid Patio Covers in Folsom

A combination cover is the answer when one part of the patio needs full cover and another does not. It puts solid panels over the area you sit and eat under and open lattice over the rest, in one structure with a single roofline and one set of posts, so the choice is not between full shade and an open yard.

Cost does not split neatly between the two styles on a per square foot basis, because part of the roof uses solid panels and part uses lattice. Span, attachment method, color and trim matter more to the final number than where the split lands. A combination section can often be added onto an existing patio cover as well, though it depends on how the existing cover is attached and what condition the posts and beams are in. We inspect what is there before quoting so you are not paying to rebuild something that is still sound.

Louvered Patio Covers in Folsom: The Apollo System

If you want to change how much sun reaches the patio through the day rather than commit to one fixed amount, the Apollo louvered system is the answer. The blades rotate closed for full shade and rain protection and open to let sun and air through, so one structure covers a July afternoon and an October morning.

The Apollo system can be integrated with any other style of aluminum cover we build, including the solid insulated IR3, the solid non-insulated and the lattice cover. On a long Folsom patio that often means a louvered section over the seating area and a fixed section over the rest, which holds the cost down while putting the adjustable roof where you actually use it. If you like the idea of adjustable light but want a lower price, a lattice cover gets you filtered light without the moving parts.

Roof Mount or Freestanding: How the Cover Attaches

Attachment is the decision that quietly drives the design, and it is worth settling early.

• Attached, roof mount or fascia mount. The cover ties into the house. It reads as part of the home, sheds water away from the wall and is the usual choice for a patio directly off a slider or a back door. The existing roofline and fascia condition determine which attachment we use.
• Freestanding. The cover stands on its own posts and touches nothing. This is the answer for a detached seating area, a pool deck, a spa pad or a patio set away from the house, and it is often the answer when setbacks or an unusual roofline make an attached build awkward.
• Solid flat or pitched. A low, level profile suits single story homes and low rooflines where a pitched cover would look out of proportion. Either way the cover carries a full gutter and downspout system.

We work out which attachment fits during the on-site measure, then engineer the structure for local wind and snow loads before anything is fabricated.

Insulated or Non-Insulated Covers for Folsom Summers

Folsom summers run hot and dry, and a west facing patio takes direct sun for hours. A standard solid aluminum cover blocks that sun completely, which is usually enough. An insulated Weatherwood IR3 cover goes further: the panel itself is insulated, so the underside stays noticeably cooler than a standard panel that has been baking all afternoon, and the space under the cover stays usable at the hottest part of the day.

The insulated panel costs more per square foot. It is worth it when the covered area is a room you actually live in during the summer, and it is usually not worth it over a walkway or a storage area. We will tell you which of those your patio is.

Built for Folsom Weather and Applicable Local Codes

Folsom gets triple digit summer afternoons, rain concentrated from November through March and occasional high wind events coming up the valley. Every cover we build for Folsom is engineered for those conditions:

• Sustained summer heat without warping, fading or losing structural integrity
• Heavy winter runoff handled through a full gutter and downspout system rather than sheeting off the edge
• Wind and snow loads engineered to the code that applies at your address
• UV exposure that breaks down lesser materials within a few seasons

The woodgrain embossed aluminum finish reads as real wood from a few feet away and needs no staining, sealing or refinishing. Aluminum covers typically last 20 to 30 years or more with minimal maintenance, which is the practical argument against a wood structure in this climate.

Do You Need a Permit for a Patio Cover in Folsom?

The City of Folsom lists patio covers as examples of major permits, which require multiple divisions or departments to review the plans. Exact requirements depend on the property and project, so the City's own Plan Review page is the authority on the current process, not this page.

We handle the process. Plans, permit submission and building to code are part of the project rather than something you manage on your own, and the cover is engineered before it is fabricated rather than after a plan check sends it back.

Folsom Neighborhoods and Nearby Areas We Serve

Our crews work across Folsom, including Empire Ranch, Broadstone, American River Canyon, Natoma Station, Willow Creek Estates, Briggs Ranch, Prairie Oaks, Russell Ranch, Lake Natoma Shores, Folsom Ranch and Historic Folsom.

Nearby we also serve Fair Oaks, Citrus Heights, Rancho Cordova, Granite Bay, Rocklin, Elk Grove and the greater Sacramento area. If your community is not listed but you are in or near Folsom, call us and we will tell you straight away whether we cover it.

Want to see the work before you call? Browse our project gallery, or look at the full range of aluminum patio covers we build across the region.

Why Folsom Homeowners Choose West Coast Awnings

• Building custom aluminum patio covers for Sacramento Valley homes since 1985
• Installers, not a kit retailer, and no stock sizes
• Every cover measured on site, engineered for your roofline and permitted before fabrication
• Solid insulated IR3, solid non-insulated, lattice, combination and louvered Apollo in one product line
• Nine Duralum colors and four cut styles
• Our own crews on every job, no subcontractors
• Lifetime warranty, and CSLB License 940406

We also build aluminum window awnings and aluminum privacy walls, which are worth adding to the same visit if a west facing window or an exposed side of the patio is part of the problem. Our patio cover and awning installation services page covers the full process end to end.

Folsom Patio Cover Questions

Do I need a permit for a patio cover in Folsom?

The City of Folsom lists patio covers as examples of major permits, which require multiple divisions or departments to review the plans. Exact requirements depend on the property and project, so the City of Folsom Plan Review page is the authority on the current process. We prepare the plans, submit the permit and build to code as part of the project, so you are not managing the paperwork or the inspections yourself.

How much does an aluminum patio cover cost in Folsom?

Every cover we build is custom fabricated to the patio, so there is no fixed price list. Cost depends on the span, the attachment method, whether you choose standard or insulated IR3 panels, and the color and trim package. We measure on site and quote the exact build at no charge.

Can you build a freestanding patio cover in my Folsom backyard?

Yes. A freestanding cover stands on its own posts rather than attaching to the house, which is the right answer for a detached seating area, a pool deck or a patio set away from the roofline. Permit requirements for a freestanding cover depend on the property and the project, and we handle the submission the same way we do on an attached build.

What is the difference between a lattice cover and a louvered patio cover?

A lattice cover has fixed openings, so the amount of light it lets through never changes. A louvered system moves. You adjust the blades to open the roof for sun or close it for shade and rain. Lattice is the answer if you want filtered light at a lower cost, and a louvered Apollo system is the answer if you want to change the light through the day.

How long do aluminum patio covers last?

Aluminum patio covers typically last 20 to 30 years or more with minimal maintenance. Aluminum does not rot, warp or need staining the way wood does, and the woodgrain embossed finish holds up to Sacramento Valley sun without refinishing season to season.

Get a Free Folsom Patio Cover Quote

Book a free on-site consultation and we will measure the patio, walk through cover style, attachment and panel options, explain how the City of Folsom permit works on your build, and give you a written quote for the exact structure. No pressure and no obligation.